
The DENZA N9 is the brand's flagship full-size SUV. Zhanhai supplied cathedral-cut white ash real-wood trim for its interior programme, introducing a tangible, non-standardised material layer into a cabin otherwise defined by screens and hard surfaces.
Cathedral figure is produced by plain slicing, creating a continuous sequence of arched peaks that open up towards the centre of the leaf. Where straight grain reads as order, cathedral grain gives each panel its own natural signature. Only adjacent leaves from the same log and the same cutting position will flow into one another. Zhanhai therefore fixes grain direction and matching relationships at the selection stage, so the console and door panels read as one continuous surface rather than unrelated pieces of veneer.

The difficulty with natural veneer in a vehicle is not the figure itself but holding it consistent at volume. Trim parts must meet light-ageing, thermal cycling, humidity, low-VOC and odour requirements while keeping batch-to-batch colour variation under control. Zhanhai works to a defined process window for veneer moisture content, substrate bonding, coating system and surface gloss, and completes master-sample approval and batch comparison before series production — so the approved sample and the parts on the line are the same product.
As a Tier 2 supplier with simultaneous engineering, process validation and volume-delivery capability, Zhanhai covers veneer selection, trim construction, prototype build and serial supply within one programme. Log sourcing and veneer slicing are handled inside the group, allowing grain and colour to be locked early and reducing late design changes caused by material availability. That integration is the practical precondition for using natural veneer in a series vehicle programme.




Talk to us about custom veneers and genuine wood interior solutions.