Red Alder veneer figure

ALDER VENEER

Red Alder Veneer

赤杨 · Alnus rubra

Red Alder · Alnus rubra

Coastal western North America · 450 kg/m³ air-dry · Natural / Engineered / Dyed · Export specification

Home / Veneer Library / Red Alder Veneer

Red Alder veneer at a glance

OVERVIEW

Red Alder (Alnus rubra) is supplied by Zhanhai as sliced veneer, with species, figure and thickness confirmed against the order specification. Stock species are held for standard categories; dyed and special figure variants are produced per order.

  • Cabinetry and drawer parts
  • Plywood and panel cores
  • Painted and stained furniture
  • Dyed decorative veneer
  • Millwork and interior fit-out
  • Pallets and packaging

Figures shown are typical ranges. Final supply, availability and figure are confirmed with the quotation and approved sample.

Technical data

DATA
Botanical nameAlnus rubra
Common nameRed Alder
OriginCoastal western North America
Air-dry density450 kg/m³ air-dry
Janka hardness590 lbf
StructureDiffuse-porous, fine uniform texture
Typical thickness0.3 mm / 0.5 mm / 0.6 mm / 0.8 mm
Sheet size2500 × 1250 mm
AvailabilityNatural, engineered and dyed; FSC material on request

Wood properties

WOOD PROPERTIES

The characteristics below describe the species as a whole. Colour, figure and grain vary with growing conditions, log source and cut orientation, which is why every order is confirmed against a sample.

PropertyDescription
HeartwoodLight tan to reddish brown, darkening and reddening with age
SapwoodNo visible distinction between heartwood and sapwood
GrainGenerally straight, with a moderately fine and uniform texture
TextureFine and even; sands especially smoothly
FigureOccasional large aggregate rays appear as small streaks on the face grain
DurabilityNon-durable to perishable; convert and dry freshly cut logs promptly
WorkabilityVery easy to work and sand; turns, glues and finishes well; soft, so avoid denting
NoteOften used as a lower-cost alternative to black cherry

Wood property data compiled from public species references: The Wood Database (USDA Forest Products Laboratory Wood Handbook), Wood Atlas 7th Edition, and published veneer technical data sheets.

Where Red Alder is used

INDUSTRIES

Selection priorities differ by industry. See the species and specification guidance for each.

Frequently asked questions

FAQ
What is red alder used for?
Cabinetry, plywood and panel cores, painted furniture, millwork and dyed decorative veneer. Because it is soft and uniform, it is often used where a consistent colour and easy machining matter more than hardness.
How does red alder compare with cherry?
Red alder is frequently used as a lower-cost alternative to black cherry. The two can look similar, but alder has no visible heartwood-sapwood boundary and shows large aggregate rays, while black cherry has a semi-ring-porous arrangement without them.
Is alder durable enough for outdoor use?
No. Alder is rated non-durable to perishable for decay, so it is used for interior applications. Freshly cut logs should be converted into material and dried promptly to avoid staining or decay.
What is the main handling consideration with alder?
The wood is soft, so care is needed to avoid denting it during handling and installation. It is otherwise very easy to machine, sand, turn, glue and finish.

Tell us your species, thickness and volume

Our sales and engineering teams will confirm availability and figure options, then provide samples, specification sheets and a quotation.

Request selection advice and quotation