Automotive wood veneer

FOR AUTOMOTIVE OEMs AND TIER 1

Wood veneer for automotive OEMs, and how we help you choose

Automotive Wood Veneer

Dashboards · door panels · trim · ambient light surrounds · Natural / Engineered / Dyed veneer · Export specification

Home / Veneer Library / Automotive

What we can do for Automotive

CAPABILITY

Zhanhai produces veneer from log to sliced sheet, so the species, figure and specification you need can be scheduled against your own production line. Standard categories are held in stock; dyed and special figures are confirmed per order. Moisture content and colour difference are managed by piece, so a run reads consistently.

    Dashboard trimDoor panelsCentre consoleDecorative trimsAmbient light surrounds

Figures shown are typical ranges. Final supply is confirmed against the order specification and approved sample.

Key specification

SPECIFICATION
Typical thickness0.5 mm / 0.6 mm / 0.8 mm
QualificationIATF 16949:2016 quality management system
Moisture controlMoisture content managed by piece
Colour controlColour difference managed by piece within a batch
Process fitCompatible with PUR and hot-melt lamination, moulding and CNC

Species available for Automotive

SPECIES RANGE

The species below are the ones most often specified for Automotive work. Actual supply follows the order specification and sample approval — we will advise on the suitable choice based on your substrate, downstream process and end use.

SpeciesCategoryAvailable figuresOrigin
Red Oak
3 specifications
天然木皮山纹 / 直纹北美洲
Ziricote
1 specifications
天然木皮直纹北美洲
Eucalyptus
2 specifications
天然木皮直纹大洋洲
Hickory
1 specifications
天然木皮直纹北美洲
Cherry(European)
1 specifications
天然木皮—欧洲
European Oak
8 specifications
天然木皮山纹 / 直纹欧洲
Claro Walnut
2 specifications
天然木皮山纹 / 直纹北美洲

Full catalogue with tone, figure and specification references: Open the veneer library

Vehicle parts in production

REAL COMPONENTS

Veneer interior components cut and finished for series production, photographed at the factory. Each part shows the figure match and edge finish that go into a vehicle programme.

Other industries

OTHER INDUSTRIES

Selection priorities differ by industry. Check the corresponding species and specification guidance.

Frequently asked questions

FAQ
Which veneer species are used in automotive interiors?
Walnut, European Oak, Ebony and Ash are common for premium programmes, while Eucalyptus is widely used where a lighter, more uniform tone is wanted. Selection depends on design intent, grain consistency and process window.
How do you control moisture and colour in automotive veneer?
For automotive supply, moisture content and colour difference are managed piece by piece rather than only at batch level, so a trim set reads consistently across a vehicle programme.
Is your production IATF 16949 certified?
Yes. Zhanhai operates an IATF 16949:2016 certified quality management system, with FSC Chain of Custody, ISO 9001 and ISO 14001 in place alongside it.
Can you support small prototype volumes before mass production?
Yes. We support prototype and small-batch sampling before programme launch, then move to scheduled batch supply once the specification is frozen.

Tell us your species, thickness and volume

Our sales and engineering teams will review the feasible species and figure options, then provide samples, specification sheets and a quotation.

Request selection advice and quotation