White Oak veneer figure

WHITE OAK VENEER

White Oak Veneer

欧洲白橡 · Quercus robur

European White Oak · Quercus robur

Europe (France, Germany, Eastern Europe) · 675 kg/m³ air-dry · Natural / Engineered / Dyed · Export specification

Home / Veneer Library / White Oak Veneer

White Oak veneer at a glance

OVERVIEW

White Oak (Quercus robur) is supplied by Zhanhai as sliced veneer, with species, figure and thickness confirmed against the order specification. Stock species are held for standard categories; dyed and special figure variants are produced per order.

  • Cabinet and door veneer
  • Engineered flooring
  • Wall panelling
  • Solid wood furniture
  • Boat interiors
  • Barrel staves

Figures shown are typical ranges. Final supply, availability and figure are confirmed with the quotation and approved sample.

Technical data

DATA
Botanical nameQuercus robur
Common nameWhite Oak
OriginEurope (France, Germany, Eastern Europe)
Air-dry density675 kg/m³ air-dry
Janka hardness1,120 lbf
StructureRing-porous, coarse texture
Typical thickness0.3 mm / 0.5 mm / 0.6 mm / 0.8 mm
Sheet size2500 × 1250 mm
AvailabilityNatural, engineered and dyed; FSC material on request

Wood properties

WOOD PROPERTIES

The characteristics below describe the species as a whole. Colour, figure and grain vary with growing conditions, log source and cut orientation, which is why every order is confirmed against a sample.

PropertyDescription
HeartwoodLight to medium brown, commonly with an olive cast
SapwoodNearly white to light brown, not always sharply demarcated
GrainStraight, sometimes interlocked or irregular depending on growing conditions
TextureCoarse and uneven, with large pores
FigureQuartersawn faces display prominent ray fleck, the most stable pattern
DurabilityRated very good against decay; widely used in boatbuilding
WorkabilityMachines and sands well; responds to stain and finishes; reacts with iron when wet
Figure noteQuartered stock shows the strongest fleck — the preferred cut for premium panels

Wood property data compiled from public species references: The Wood Database (USDA Forest Products Laboratory Wood Handbook), Wood Atlas 7th Edition, and published veneer technical data sheets.

Where White Oak is used

INDUSTRIES

Selection priorities differ by industry. See the species and specification guidance for each.

Frequently asked questions

FAQ
What is the difference between European oak and American white oak?
European oak (Quercus robur) tends to show a greyer, olive-tinted heartwood and longer ray fleck, and is usually imported into North America. American white oak (Quercus alba) is paler and generally more widely available in North American markets. For veneer specified on an export project, we confirm which species is supplied against the order.
Why does oak show ray fleck, and does it affect usability?
The fleck comes from the large rays typical of the oak group and is most visible on quartersawn faces. It is a decorative feature rather than a defect, and it is the reason quartersawn oak is specified for premium cabinetry and panelling.
What thickness is available for white oak veneer?
Common slicing thicknesses are 0.3 mm to 0.8 mm, with heavier options for solid veneer products. We confirm thickness and sheet size against the order specification and the sample.
Is European oak suitable for outdoor or wet applications?
Oak has very good decay resistance and is traditionally used in boatbuilding and exterior joinery. For exterior use we still advise confirming the intended finish and exposure conditions, and supplying a suitable backer.

Tell us your species, thickness and volume

Our sales and engineering teams will confirm availability and figure options, then provide samples, specification sheets and a quotation.

Request selection advice and quotation