Red Oak veneer figure

RED OAK VENEER

Red Oak Veneer

北美红橡 · Quercus rubra

Red Oak · Quercus rubra

Eastern North America (Northeastern USA and Southeastern Canada) · 700 kg/m³ air-dry · Natural / Engineered / Dyed · Export specification

Home / Veneer Library / Red Oak Veneer

Red Oak veneer at a glance

OVERVIEW

Red Oak (Quercus rubra) is supplied by Zhanhai as sliced veneer, with species, figure and thickness confirmed against the order specification. Stock species are held for standard categories; dyed and special figure variants are produced per order.

  • Cabinetry
  • Flooring
  • Interior trim and panelling
  • Furniture
  • Veneer and plywood
  • Architectural millwork

Figures shown are typical ranges. Final supply, availability and figure are confirmed with the quotation and approved sample.

Technical data

DATA
Botanical nameQuercus rubra
Common nameRed Oak
OriginEastern North America (Northeastern USA and Southeastern Canada)
Air-dry density700 kg/m³ air-dry
Janka hardness1,220 lbf
StructureRing-porous, coarse texture
Typical thickness0.3 mm / 0.5 mm / 0.6 mm / 0.8 mm
Sheet size2500 × 1250 mm
AvailabilityNatural, engineered and dyed; FSC material on request

Wood properties

WOOD PROPERTIES

The characteristics below describe the species as a whole. Colour, figure and grain vary with growing conditions, log source and cut orientation, which is why every order is confirmed against a sample.

PropertyDescription
HeartwoodPinkish to reddish brown
SapwoodWhite to light brown
GrainMostly straight-grained
TextureCoarse
FigureLess pronounced ray fleck than white oak, because the rays are smaller
DurabilityRed oaks are the most abundant species group in the eastern hardwood forests
WorkabilityMachines well; takes a wide range of finish tones, from natural to golden
NoteFast-grown red oak with wide rings is stronger and heavier than slow-grown stock

Wood property data compiled from public species references: The Wood Database (USDA Forest Products Laboratory Wood Handbook), Wood Atlas 7th Edition, and published veneer technical data sheets.

Where Red Oak is used

INDUSTRIES

Selection priorities differ by industry. See the species and specification guidance for each.

Frequently asked questions

FAQ
How does red oak differ from white oak?
Red oak has a pinkish to reddish-brown heartwood, a coarser texture and less pronounced ray fleck than white oak. White oak is generally better for exterior use because of its higher decay resistance, while red oak is more abundant and is the usual choice for interior cabinetry and flooring.
Is red oak a sustainable choice?
Red oak is one of the most abundant species groups in North American hardwood forests and is not listed in the CITES Appendices or considered threatened. It is also available with FSC certification, which we can supply on request.
What is red oak veneer used for?
Cabinetry, flooring, interior trim, panelling, furniture and veneer products. Because it machines well and takes a wide range of finish tones, it is often the practical specification for high-volume interior work.
Can red oak be supplied in different figures?
Red oak is usually supplied as plain straight-grain or rotary-cut material. Cathedral figure from flat-sawn stock is also available. Figure and cut type are confirmed with the sample and quotation.

Tell us your species, thickness and volume

Our sales and engineering teams will confirm availability and figure options, then provide samples, specification sheets and a quotation.

Request selection advice and quotation