White Ash veneer figure

WHITE ASH VENEER

White Ash Veneer

白栓 · Fraxinus americana

White Ash · Fraxinus americana

Eastern North America (Texas to Minnesota, Nova Scotia to Florida) · 680 kg/m³ air-dry · Natural / Engineered / Dyed · Export specification

Home / Veneer Library / White Ash Veneer

White Ash veneer at a glance

OVERVIEW

White Ash (Fraxinus americana) is supplied by Zhanhai as sliced veneer, with species, figure and thickness confirmed against the order specification. Stock species are held for standard categories; dyed and special figure variants are produced per order.

  • Flooring, including herringbone and parquet
  • Furniture and cabinetry
  • Automotive interior trim
  • Tool handles and sports equipment
  • Millwork and interior joinery
  • Sliced decorative veneer

Figures shown are typical ranges. Final supply, availability and figure are confirmed with the quotation and approved sample.

Technical data

DATA
Botanical nameFraxinus americana
Common nameWhite Ash
OriginEastern North America (Texas to Minnesota, Nova Scotia to Florida)
Air-dry density680 kg/m³ air-dry
Janka hardness1,320 lbf
StructureRing-porous, coarse and even texture
Typical thickness0.3 mm / 0.5 mm / 0.6 mm / 0.8 mm
Sheet size2500 × 1250 mm
AvailabilityNatural, engineered and dyed; FSC material on request

Wood properties

WOOD PROPERTIES

The characteristics below describe the species as a whole. Colour, figure and grain vary with growing conditions, log source and cut orientation, which is why every order is confirmed against a sample.

PropertyDescription
HeartwoodLight brown to dark brown, with brown streaking
SapwoodCream white to light brown, distinctly demarcated from the heartwood
GrainStraight, with strong and pronounced figure
TextureCoarse, even and uniform
FigureDistinctive brown streaks and small mineral flecks along the grain
DurabilityGood decay resistance; strong and shock resistant for its weight class
WorkabilityExcellent bending properties, steam-bends well; glues and finishes well
NotePre-bore when nailing on the harder heartwood to avoid splitting

Wood property data compiled from public species references: The Wood Database (USDA Forest Products Laboratory Wood Handbook), Wood Atlas 7th Edition, and published veneer technical data sheets.

Where White Ash is used

INDUSTRIES

Selection priorities differ by industry. See the species and specification guidance for each.

Frequently asked questions

FAQ
What is ash veneer commonly used for?
Ash is widely used for flooring, especially herringbone and parquet, where its strength and shock resistance matter. It is also a standard choice for furniture, cabinetry, interior trim and automotive interior veneer.
Is ash as hard as oak?
Comparable. White ash has a Janka hardness of about 1,320 lbf, slightly above red oak at around 1,220 lbf, and both are classed as medium-hard hardwoods rather than the hardest available timbers.
How should ash be nailed and screwed?
Pre-boring is recommended, particularly on the harder heartwood, because ash can split if fasteners are driven without a pilot hole.
Does ash veneer have a strong grain figure?
Yes. Ash is known for pronounced straight grain with brown streaking along the fibres and occasional small flecks, which gives it a distinctly characterful appearance on flat-sawn faces.

Tell us your species, thickness and volume

Our sales and engineering teams will confirm availability and figure options, then provide samples, specification sheets and a quotation.

Request selection advice and quotation